Price
KWD 2.000
per bag • always available
webercol WP is a ready-mix cement-based tile adhesive modified with redispersible polymer, classified C1T to EN 12004 and meeting ANSI A118.4 as a latex-Portland cement mortar. It is rated for internal walls and floors plus external floors, with strong bond and water resistance, and the "T" slip-resistance rating means wall tiles hold without sliding down. Typical work is bathrooms, rooms, stairs and parking areas, over concrete, lightweight and AAC blocks, gypsum board, stone walls and cementitious plaster or render. It sits a step above webercol fix — it can go on external floors and takes a wider range of substrates — but it is still a C1 adhesive, so for porcelain, facades or pools go to webercol pro or webercol flex. Note the name: WP is water RESISTANT, not a waterproofing membrane. Where to use it: • Internal wall and floor tiling • External floor tiling • Bathrooms • Rooms • Stairs • Parking areas • Tiling onto concrete, lightweight and AAC blocks, gypsum board, stone walls, cementitious plaster and render Important: • Not for external walls or facades — outside it is for floors only; use webercol flex on facades. • Not for swimming pools or submerged areas — use webercol flex. • Not for porcelain or other low-porosity tiles — use webercol pro or webercol flex. • Not for wood substrates.
