Price
fromKWD 9.500
per roll • always available
Surface finish
SI VIA 200 is a torch-applied APP-modified bitumen waterproofing membrane from Saudi Insulation Factory, reinforced with a 200 GSM non-woven polyester core and finished with polyethylene film on both faces. The APP compound gives it high tensile and tear strength, good elongation and stable performance in heat (softening point 155 C, no flow after 2 hours at 120 C), while 1000 N puncture resistance and L4 static/dynamic ratings suit it to heavy-trafficked decks. It is supplied in 2, 3, 4, 5 and 6 mm thicknesses on 1 x 10, 1 x 8 and 1 x 6 m rolls, and can be laid in multiple layers over a primed surface. Because the sheet carries PE film on both sides, it is installed under a protection course rather than left exposed. Where to use it: • Roofs • Basements • Footings • Beams and columns • Pipe capping • Car parking • Bridge decks • Ducts and wet areas Choose the finish carefully: the PE-film face must be covered by a protection course, while the mineral (مبحص) granule face is the one that can be left exposed to the sun.
